These columns further increase the versatility of the S2005 cabinets, by effectively integrating the front mounting angle into the corner between the mounted equipment and the front of the cabinet.

The columns complement all existing configurations, and they may be specified in all 600, 700, and 800 wide cabinets, which may then be bayed with all 2005 cabinets of the same height and depth.

They can be fitted to the front, rear, or both front &rear of the cabinet, and produce a setback of just 45mm thus ensuring maximum  usable depth.

These columns are intended for use where ready access to equipment is a primary requirement and a door is not needed. Radio, TV, and Recording Studios are good examples of this application.

Should doors be required, all of the 2005 range of doors may be considered, in either glass, metal or acrylic.

Care should however be exercised when using doors with these columns, as many panels have switches, handles etc. that protrude out and could interfere with the door closing. Distance between mounting and inside of door is 45mm. As with all our cabinet range, all standard accessories are available.

Available Sizes

Heights : 12 to 45 (RU)
Depths : 600, 700, 800, 900, 1000 & 1200 (mm)
Widths : 600, 700 & 800 (mm)

Related Accessories

Cantilever Shelf

Colours
APO Grey Ripple

APO Grey Ripple
P/# 34000-81

Gypsy Beige Ripple

Gypsy Beige Ripple
P/# 34000-07

IBM Blue Ripple

IBM Blue Ripple
P/# 34000-79

Charcoal Grey Ripple

Charcoal Grey Ripple
P/# 34000-34

Light Grey Ripple

Light Grey Ripple
P/# 34000-41

Sable Black TX

Sable Black TX
P/# 34002-44

The colour samples above are our standard range. As colour printing can only give a representative indication we suggest customers request spray out samples to guarantee exact colour match. These will also give accurate gloss and texture levels. (Semi gloss texture finish is always recommended and supplied unless requested otherwise).

Any other colour may be specified, however additional cost and or lead time will result. For accurate colour identification refer to Australian Standards AS 2700S-1985 or Pantone standards. Gloss level and texture should also be specified.