INTERNAL FRAME SWING ASSEMBLIES
This swing frame assembly has been adapted to allow it to be used in Type ‘A’, S2005, S280 Industrial and RFI 19” cabinets.
The design of the swing frame requires the usable rack area to be reduced by 3‑rack units.
When using 18RU, 27RU, 39RU or 45RU cabinets, the maximum height swing frame assembly for the cabinet is 15RU, 24RU, 36RU and 42RU respectively.
The swing frame assembly is most useful for rear mounting patch panels behind front mounted equipment whilst still allowing access to the equipment rear. They can also be mounted directly on to a wall typically in a riser cupboard. Areas of confined space that require rear access is another popular application.
CABINET FRONT STABILISERS
Designed to suit S2005 range of cabinets. These add to the stability of the cabinet when heavy slide mounted equipment is fully extended out; file servers are typical of this equipment. The stabilisers may be pivoted back flush with the cabinet front when they are not required. This is an important safety feature as fixed stabilisers‑present a significant pedestrian‑traffic hazard. A panel printed with a warning regarding the use of‑Front Stabilisers is available and recommended.
LIFTING SPREADER BARS
Designed for use with all MFB standard sized cabinets. Used in conjunction with eye bolts mounted in the cabinet top, this bar assembly eliminates side loading on the eye‑bolts.
Suitable for fitting to the inside face of doors, side panels etc, accepts up to A4 size. Attachment is by double sided foam tape.
CAGE NUT ASSEMBLY
Comprises M6 cage nut, a nylon washer and an M6 x 16 pan head cross recess screw with a black finish.
|Bag of 50||03025-04|
RackstudsTM are the revolutionary replacement for the cage nut used to mount IT, Pro A/V, Security, Telecommunications in 19” racks.
|Bag of 100||31030-09|
|RU||TYPE A||TYPE C|
DIN RAIL AND FRONT PANEL
Designed to accept DIN rail mounting components like circuit breakers, earth bars etc. The DIN rail and front panel are black. The panel cut-outs will accept various blanking plates to infill between components and can be customised to suit individual applications.
|3RU Front Panel 19″||12055-01|
LCD MONITOR MOUNT PANEL 19”
This 3RU Panel is designed to assist with the mounting of flat screens within a cabinet. The panel mounts across the mounting angles and comes with VESA 75mm and VESA 100mm mounting detail. Made from 2.0mm steel and finished in powder coated black.
LIFTING EYE BOLT
Forged steel and come with an M10 thread and a galvanised plated finish. These certified 250kg each load capacity eye bolts should be specified at time of ordering and for safe lifting, spreader bars should always be used.
|TYPE (SET OF 4)||CODE|