LACING RINGS

Positioned at any available hole, cables are bunched and tied together. Rings provide support at the point where cables branch off to equipment.

LACING BARS

Lacing Bars provide additional cable support and can be used at any location within the rack.

EARTH BAR

The copper earth bar mounts vertically in the racks and comes with M6 tapped holes at 100mm pitch. Also available is an optional Insulation bush. Tin plated copper 3mm x 20mm.

CABLE RETAINING HOOP PANEL

Fitted with 5 hoops that feature open ends. It is designed to fit across the 19” racking to provide a sturdy support for cables. Finished in black powder coat.

HORIZONTAL WIRE MANAGEMENT TRAY

This 1RU tray is designed to provide cable support and distribution for use with patch panels etc. Finished in black powder coat.

HINGED CABLE CARRIER

Designed to mount to the rear of telescopic equipment and provide a support for cables when being moved in and out.

CABLE TRAYS

Providing a traceable wire management system which is designed to provide a more simplified installation. The locating tab at the bottom of the tray offers simple positioning along the base frame teamed up with push in snap rivets which fasten the cable tray onto the frame. The design allows the use of Velcro and cable ties.  All designs suit toolless mounting with no cage nuts or screws required. Designed with a safety edge for cabling, also providing the ability to interlock additional cable trays, creating a wider space for cabling.

Vertical Cable Tray Assembly Instructions

VERTICAL CABLE DUCTING FOR CHANNEL RACKS

Vertical cable ducting can be fitted to both front and rear of the steel channel rack- providing excellent cable management for patching applications. Cable duct kits can be fitted with an added feature of baying them together to create a suite of racks.

To assist with providing a neat cable management system, all ducts are fitted with a single full height door with a concealed soft closing hinge. All kits are fitted with 12mm diameter metal support fingers and feature cable entry holes down the sides of the chassis to allow for cabling.

VERTICAL CABLE DUCTING FOR REDUCER CABINETS

The cable duct kits can be fitted down both sides of any 800mm wide cabinet, or down one side of a 700mm wide cabinet while still maintaining 19” racking. Installation into the rack has been made easy and quick 4-point fixing.

The 100mm Wide x 200 mm deep duct kit, can be fitted to both the front and rear of a cabinet. See below plan view drawing to establish which depth rack will suit your application.

Cable duct fitted to cabinet at front with mounting angle

PVC CABLE DUCTING

Cables are retained inside ducting by snap on cover and exit from ducting through the slots provided. Ducting size 80mm wide x 60mm deep. Made of PVC.

HORIZONTAL CABLE DUCTS

2RU Horizontal Cable ducts may be used to bridge cables across racks, these ducts feature finger openings that come with plastic cable protectors to guide the cables smoothly without the risk of sharp bends occurring. These fingers run along both sides of the duct. The unit is also fitted with a cover. Constructed in steel and come with a black powder coat finish.

ROOF CABLE DUCT

This 2 stage fully adjustable cable duct extends from 450mm to 850mm. The addition of a third section extends it up to a further 400mm. Mounts directly onto the roof gland plate opening. Both sections are in two parts allowing the duct to be assembled around existing cabling. Powder coat finish in customer choice of colour. Suits all cabinets with top gland plate including wall mount cabinets.

Note: The third section is the lower section mounted upside down.

OVERHEAD CABLE DUCT SYSTEM

Designed to accommodate a large number of cables across a suite of S2005 cabinets. The 200mm wide duct sits above the roof panel and provides a “drop in” feature, which allows cables to enter the cabinet in the correct position. The rail kit offers the flexibility to mount the duct at any position throughout the depth of the rack. This also provides the ability to add additional ducts for extra width. Both the 700 wide and 800 wide have the “drop in” feature. Assembly is easy with all required fixing points already on the rack, simply screw in the rails kits and fix on the duct sections.

CABLE GLAND EDGE PROTECTOR

This easy to apply protector can be cut to length and grips to the edge of the steel for superior protection of cables. Edge protector can be used on any cable cut out no matter the shape or size.

Note: To suit standard 200 x 75 cable gland opening.